Toa C-CH100FH - Manual (Page 10)

8.2.3. Connection when using the C-CH100FH in combination with the 24 VAC camera
8.2.4. Connection when using the C-CH100 in combination with the 24 VAC camera
9. SAFETY WIRE INSTALLATION
A safety wire can be installed to prevent the unit from falling off. When installing, connect a wire hook to the
suspension wire entry hole
(5 mm in diameter).
Note: Check to confirm the length, diameter, and hook strength of the safety wire before installing since the
impact of the unit's fall onto the floor is quite great.
Power input terminal block
inside the housing
Power input terminal block
inside the housing
Housing cable
Housing cable
Connector (supplied with the zoom lens)
Connector (supplied with the zoom lens)
Zoom lens
Zoom lens
Camera
Camera
No wiring is required.
Attach the BNC plug.
Attach the BNC plug.
Remove solderless terminals.
Remove solderless terminals.