Toa C-CH100FH - Manual (Page 4)

2. GENERAL DESCRIPTION
TOA's C-CH100 and C-CH100FH are rainproof outdoor camera housings to protect video cameras and their
lenses from a direct sunlight, rain and wind. The C-CH100FH comes with a heater and fan.
3. HANDLING PRECAUTIONS
• Avoid applying extremely strong force to the unit when opening or closing the camera housing cover.
Frequent application of force may cause damage to a stay function.
• Use suitable nuts and bolts for the construction and material of the wall when mounting the unit to the wall.
(Nuts and bolts for wall mounting are not supplied with the unit.)
• To clean the unit, wipe with a soft cloth dipped in a neutral cleanser. Never use benzine, thinner or other
volatile liquids. The unit's case may be deformed or its finish discolored.
• This housing meets the rain-proof requirements of the IEC529 IP33 Standard, and is designed to be
resistant to rain hitting it at angles from 90 degrees vertical to 60 degrees above horizontal. Avoid installing
the housing in locations that may be exposed to splashing water or jet streams hitting it from below. Also
take care to install the housing within a tilt angle range of from 60 degrees above horizontal to 70 degrees
below, as rainwater could collect in the housing, causing image fogging and possible camera damage.
4. NOMENCLATURE
Mounting hole (M6, 2 places)
[Top view]
[Side view]
[Front view]
[Bottom view]
Window
Base
Cover (Sunshade)
Latch catch (with key hole)
Hook
Suspension wire entry hole
Cord entry bushing
( 10- 17 mm)
Cord entry bushing
( 5- 9.5 mm)
Mounting hole (M6, 2 places)
(Housing cover is open.)
Stay Stay
Lock release button