Triner Scale TSM5-28-LS - Manual (Page 4)

Page 1-1
1.0 INTRODUCTION
The TSM5-28-LS scale is a fully electronic weighing system, engineered for years of
reliable service.
It has four corner-mounted NTEP approved loadcells that are recessed into the scale
frame for protection. Also included is a signal-trim summing board enclosed in a
watertight junction box. The junction box is accessible from the top of the scale for ease
of service and installation.
The scale utilizes precision “ball and cup” style adjustable leveling feet designed to
compensate for irregularities in the floor. For permanent installations, two of the four feet
can be held in place with the optional foot retaining plates.
1.1. UNPACKING
All scale platforms are shipped LTL on a pallet. Remove the packing material and
inspect the scale for any damage that may have been caused during shipment.
All other standard components are shipped separately via UPS. This includes the
digital indicator, leveling feet and any small accessories ordered.
The scale comes factory calibrated with the digital
indicator. There is no need to calibrate the scale. Do
not attempt to calibrate the scale without contacting
a qualified scale technician or the factory.