TYREDOG TD-1000A-X Owners Manual - Manual (Page 15)

14
Remove the sensor cap and insert the battery like shown.
The LCD monitor will beep, and the corresponding display for that sensor
flash, alternating between ‘Lo.P’ and ’00.0’.
Replace the battery cover and ensure it is screwed on tight.
EG: Sensor RL is online, but no pressure is detected.
This is indicating that the sensor is online, but not yet mounted. Repeat this
process with the remaining sensors until all sensors are online. If any
sensors fail to come online, please try a battery from another sensor, or
consult your nearest Tyredog dealer. Once all sensors are online, proceed to
fitting the sensors to your tyre valves.
Blinking