2 back panel input connections – USL JSD-80 Manual User Manual

Page 17

Advertising
background image

USL, Inc. JSD-80 Instruction Manual

Page 17

3rd Edition. February, 2006

6.2 Back Panel Input

Connections

Projector Inputs

The projector inputs are connected through

standard 9-pin D-type connectors. (These

connectors are included with the JSD-80).

The pinout is:
1. In L+
2. In L-
3. Shield
4. In R+
5. In R-
6. Gnd
7. Reserved
8. Reserved
9. Gnd

(An adapter board with setscrew terminals

is available for solderless connections.)

Non-Sync Inputs - Analog

Two RCA connectors facilitate easy con-

nection to standard CD players. A software

fade in/fade out algorithm allows smooth

transition between intermission music and

the main program.

Auxiliary Input - Analog

Two RCA connectors are used to connect

to external two-channel sources such as a

sound card in a computer supplying video

advertising content.

Microphone Input

The public address balanced microphone

input is available on a standard 9-pin D-type

connector.

The pinout is:
1. Mic in +
2. Mic in -
3. Reserved
4. Reserved
5. Chassis Gnd.
6. N/C
7. 9 V DC
8. Gnd
9. N/C

The “Mic in +” and “Mic in -” terminals are

for the balanced medium-low impedance

microphone inputs. The shield of the micro-

phone cable should be connected to chassis

ground on pin 5. A 9 V DC power pin allows

easy connection of electret (powered) mi-

crophones.

EXT 1 (Analog)

The Analog input is an eight-channel un-

balanced analog audio input from a digital

soundtrack player. The 25-pin D connector

is compatible with most decoders. Input

level should be 300 mV for all channels. See

Section 12.

EXT 2 (Digital)

The Digital input is a digital domain input

confi gured for eight channels (Four AES-

EBU pairs with sample rate from 32 to 96

kHz). Requires optional AES-EBU Module

(DI85). See Section 12

Non/Sync Inputs - Digital

Requires optional Module (DI83). An RCA

jack accepts S/PDIF inputs from CD, DVD,

or computer sound cards. Sample rates

from 32-96 kHz PCM are supported, AC3

bitstreams are also supported.
The DI83 module in this processor, which

decodes Dolby® Digital bitstreams, is not

intended for 35mm fi lm. The DI83 is intended

for alternative content only.

Auxiliary Inputs - Digital

Requires optional Module (DI83). An RCA

jack accepts S/PDIF inputs from CD, DVD,

or computer sound cards. Sample rates

from 32-96 kHz PCM are supported. AC3

bitstreams also are supported.

Advertising