VACUUBRAND HP 63B2 User Manual
Page 2
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999069 / 24/09/2014
Dear customer,
Your VACUUBRAND pumping unit is designed to provide you with many years of trouble-free service
with optimal performance. Our many years of practical experience allow us to provide a wealth of appli-
cation and safety information. Please read these instructions for use before the initial operation of your
pumping unit.
VACUUBRAND vacuum pumps combine our many years of experience in design, construction and
practical operation, with the latest developments in material and manufacturing technology.
Our quality maxim is the ”zero defect” principle:
Every vacuum pumping unit, before leaving our factory, is tested intensively, including an endurance run
of 24 hours. Any faults, even those which occur rarely, are identified and can be eliminated immediately.
After completion of the endurance run, every pumping unit is tested, and must achieve specifications
before shipment.
We are committed to providing our customers only pumps that meet this high quality standard.
While our pumps cannot eliminate all of your work, we design, manufacture and test them to ensure that
they will be an effective and trouble-free tool to assist you in that work.
Yours,
VACUUBRAND GMBH + CO KG
After sales service:
Contact your local dealer or call +49 9342 808-5500.
The document ”Safety information for vacuum equipment” is part of this
manual! Read the ”Safety information for vacuum equipment” and observe
the instructions contained therein!
Trademark index:
VACUU•LAN
®
(US-Reg.No 3,704,401), VACUU•BUS
®
, VACUU•CONTROL
®
, Peltronic
®
, VARIO
®
(US-
Reg.No 3,833,788), VACUUBRAND
®
(US-Reg.No 3,733,388) and also the shown company logos are
trademarks of VACUUBRAND GMBH + CO
KG in Germany and/or other countries.