VACUUBRAND MD 1 VARIO-SP User Manual
Page 30
Advertising
Replacing the device fuse (only MD 1 C/US)
➨
Unscrew the fuse hold-
er at the side of the
pump using a slotted
screw driver.
➨
Replace the defective
fuse by a fuse of the
same type (see „Tech-
Reassemble holder
with fuse to the pump.
➨
Switch off the pump.
➨
Disconnect the electrical power cord before un-
screwing the fuse holder.
Identify and eliminate the cause of failure before switch-
ing on the pump again.
Advertising
This manual is related to the following products: