YSI PC6000 - Manual (Page 8)

Getting Started Section 2
YSI Incorporated PC6000 Software Operations Manual 4
Select the Baud option to check the baud rate. The baud rate should be 9600. If it is not,
highlight it and press Enter. A list of possible baud rates will appear. Select 9600 from the list
and press Enter.
Select the Printer option to specify the parallel port (LPT1, LPT2 or LPT3) to which your
printer is connected. If no printer is connected, select LPT1. Press Enter after making your
selection.
Select Printer type to select the type of printer connected to your computer system. From the
list, choose the selection that best describes your printer. If your printer is not on the list, refer to
your printer's instruction manual to determine what type of printer your printer emulates. Press
Enter after making your selection.
Select the Menu colors option to choose a color scheme for the PC6000 menus. As you move
the cursor between color schemes, the screen changes to display your selection. Press Enter to
confirm a selection.
Select the Plot colors option to choose a color scheme for the PC6000 plots. As you move the
cursor between color schemes, the screen changes to display your selection. Press Enter
to
confirm a selection.
Other setup functions are described in Section 4.2, Setup Menu, but are usually are not
necessary for a quick start into the sondes operations. Press Esc
to exit the Setup Menu. The
cursor will return to the PC6000 Menu bar.