Classe Audio CDP-300 - Manual (Page 29)

29
status Th e status screen provides several items of information on the currently playing
disc, as well as access to information on the software used in and the internal
sensors of the CDP-300.
version info Th e version info button on the status screen takes you to the version
information screen. From time to time Classé develops new software that adds
features or enhances the operation of the CDP-300. Each new software version
has its own Version Number. Th
e Version Info Screen displays the Version
Number of the software that your unit is running. Th e latest software is always
posted on the Classé website (www.classeaudio.com). If the version number
displayed on the Version Info Screen is lower than the version posted on the
Classé website, you may want to update your unit. Simple and detailed updated
instructions are also provided on the website. If you ever have occasion to call
our technical support people to ask a question not covered in this manual, they
may want to know precisely what software your unit is running. Having this
information available will help them to give you the best possible service.
sensors Th e sensors button on the status screen takes you to the sensors screen, which
displays information about several internal sensors within the CDP-300. It is
unlikely you might ever need the sensor information, unless directed to do so by
a customer service representative at Classé in order to help troubleshoot some
unexpected problem.
CAN-Bus Classé’s Controller Area Network, or CAN-Bus, opens the way to a new level
of interaction between our Delta range of amplifi ers, preamps, processors and
source components. When the CDP-300 is connected with CAN-Bus, the
diff erent elements of a Delta series system are in constant communication,
creating a “global” network that delivers system wide status information and
shared operational features, all through the touchscreen display.
features CAN-Bus will allow a single Delta series touchscreen to:
• Display status information for every connected unit, including amplifi ers
which do not have a touchscreen display.
• Create a “PlayLink” that allows an SSP or Preamp to automatically switch
to the correct input when a Delta series source component starts playback.
• Adjust the global system brightness.
• Confi gure the entire system to go in and out of standby at the touch of a
button and also bring individual components in and out of standby.
• Mute any connected unit.