Specifications – Classe Audio CDP-300 User Manual
Page 47
47
Specifications
All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
Frequency response
(single-ended)
8 Hz – 20 kHz +0/-0.7dB
(balanced)
8 Hz – 20 kHz ±0.1dB
Distortion (THD+noise) 0.0012%
Output voltage (single-ended) 2Vrms
Output voltage (balanced) 4Vrms
Signal-to-noise ratio 110dB
typical
Channel separation
better than 112dB
D/A Converter
3 x Cirrus Logic CS4398
Audio sample rate 192kHz
Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video,
VCD, SVCD, MP3, WMA, DVD-R, DVD+R,
DVD-RW, DVD+RW
Audio outputs
6 x RCA, 2 x XLR, Coax S/PDIF 1 x RCA,
AES/EBU 1 x XLR, Optical 1 x Toslink
Video outputs
HDMI, Component (progressive scan),
S-Video, Composite
Internal Scaling
480i (via all video outputs),
480p (via component and HDMI)
720p/1080i/1080p (via HDMI)
Power consumption 72W
Mains voltage
determined by the needs of country for which
the unit was manufactured; cannot be reset by dealer or user
Overall dimensions
Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
Net weight
27 lbs (12.3 kg)
Shipping weight
35 lbs (15.9 kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet:
http://www.classeaudio.com
email: [email protected]
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.