Classe Audio CDP-300 User Manual
Page 40
40
level trims Th
e level trims adjustments adjust the speakers’ levels manually as you might
have done with other surround processors. A noise sequencer is available to
provide a reference signal for adjustment purposes. Holding a dB SPL meter at
the listening position, at arm’s length, and pointing straight up at the ceiling,
adjust the level of each speaker in turn until it reads 75 dB SPL when the meter
is set to “C” weighting and Slow response.
Note that the level trims are applicable only to the analog outputs of the
CDP-300. As with your other source components, the CDP-300’s digital
outputs are forwarded to the associated preamplifi er/processor unchanged.
Th
is allows your preamplifi er/processor to be accurately calibrated once for all
incoming source signals.
Th
e Dolby Late Night button engages and disengages the Late Night mode for
Dolby Digital soundtracks, allowing you to enjoy movies with less chance of
disturbing others.
video setup Taking full advantage of the CDP-300’s extensive video capabilities is simple.
Five menus will take care of everything.