Ram Trucks 2015 ProMaster - User Guide - Manual (Page 10)

KEY FOB
Locking And Unlocking The
Doors
• Push the LOCK button once to lock all
the doors.
• Push the UNLOCK button once to un-
lock the driver’s door only and twice
within five seconds to unlock the pas-
senger door.
All doors can be programmed to unlock
on the first push of the UNLOCK button.
Please refer to “Uconnent
® Settings” in
“Understanding Your Instrument Panel”
in the Owner’s Manual on your DVD for
further information.
SEAT BELT SYSTEMS
Lap/Shoulder Belts
• All seating positions in your vehicle are equipped with lap/shoulder belts.
• Be sure everyone in your vehicle is in a seat and using a seat belt properly.
• Position the lap belt so that it is snug and lies low across your hips, below your
abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt.
To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
A snug seat belt reduces the risk of sliding under the seat belt in a collision.
• Position the shoulder belt across the shoulder and chest with minimal, if any slack
so that it is comfortable and not resting on your neck. The retractor will withdraw
any slack in the shoulder belt.
Key Fob
1 — Cargo Doors
2 — Unlock
3 — Lock
G E T T I N G S T A R T E D
8