Ram Trucks 2015 ProMaster - User Guide - Manual (Page 112)

FLUIDS, LUBRICANTS AND GENUINE PARTS — DIESEL ENGINE
Engine
Component Fluid, Lubricant, or Genuine Part
Engine Coolant We recommend you use MOPAR ® Antifreeze/
Coolant 10 Year/150,000 Mile Formula OAT
(Organic Additive Technology).
Engine Oil Only use ACEA C3 5W-30 Synthetic Low
Ash engine oil meeting Chrysler Material
Standard MS-11106 or Pennzoil Ultra
Euro L full synthetic 5W-30 motor oil.
Engine Oil Filter We recommend you use MOPAR ® Engine
Oil Filters.
Fuel Filter We recommend you use MOPAR ® Fuel Fil-
ter. Must meet 3 micron rating. Using a fuel
filter that does not meet the manufacturers
filtration and water separating requirements
can severely impact fuel system life and reli-
ability.
Fuel Selection Use good quality diesel fuel from a repu-
table supplier in your vehicle. Federal law
requires that you must fuel this vehicle
with Ultra Low Sulfur Highway Diesel fuel
(15 ppm Sulfur maximum) and prohibits
the use of Low Sulfur Highway Diesel fuel
(500 ppm Sulfur maximum) to avoid dam-
age to the emissions control system. For
most year-round service, No. 2 diesel fuel
meeting ASTM specification D-975 Grade
S15 will provide good performance. We
recommend you use a blend of up to 5%
biodiesel, meeting ASTM specification
D-975 with your diesel engine. This vehicle
is compatible with biodiesel blends greater
than 5% but no greater than 20% biodiesel
meeting ASTM specification D-7467 pro-
vided the shortened maintenance intervals
are followed as directed.
Diesel Exhaust Fluid MOPAR ® Diesel Exhaust Fluid (API Certi-
fied) (DEF) or equivalent that has been
API Certified to the ISO 22241 standard.
Use of fluids not API Certified to ISO
22241 may result in system damage.
M A I N T A I N I N G Y O U R V E H I C L E
110