Settings, Digiview data display brightness, Smartpower – Cobra Electronics XRS 9740 User Manual

Page 14: Bright, Dimmer, Dark, Pwr save, Power on, Power off

Advertising
background image

Nothing Comes Close to a Cobra

®

23

Settings

Intro

Operation

Customer
Assistance

Warranty

Notice

Secondary Icons

Your Detector

22 English

DigiView Data Display Brightness

Your detector has a Bright display mode (for daytime driving) and three levels
of Dim display modes (Dim for dusk driving, Dimmer for night driving and
Dark where no visual alerts will be displayed) to control the display’s
brightness levels. The factory setting is Bright. The factory Dim mode
default setting is Dimmer.

Select/Dim Button

Press and release

Dark Indicator

.

To Change the Brightness to Dim

Press and release the
Select/Dim button once.

Tone

Visual Display

Voice

Two beeps

Dim, Dimmer
or Dark

Dim, Dimmer
or Dark

To Change the Brightness to Bright

Press and release the
Select/Dim button again.

Tone

Visual Display

Voice

One beep

Bright

Bright

NOTE
When you change to Dim mode, the unit will enter whichever
dim default mode is set at the time.

Intro

Operation

Customer
Assistance

Warranty

Notice

Main Icons

Secondary Icons

Dim Display

Dim

Bright Display

Bright

Dimmer Display

Dimmer

Dark Display

Dark

Settings

Intro

Operation

Customer
Assistance

Warranty

Notice

Secondary Icons

Your Detector

SmartPower

Your detector includes the SmartPower feature that, when activated, will put the
unit into Standby mode (low power) for about 30 minutes after the car’s engine
has been turned off. After 30 minutes in Standby mode, the unit will automatically
turn off.

Before SmartPower enters Standby mode, you will hear
one beep and Pwr Save will appear on the display. To
return the unit to normal Power mode or exit Standby
mode, start the car, press any button or turn the unit off
and then on again. The factory setting is SmartPower on.

SmartPower Entering
Standby Mode

Pwr Save

SmartPower On

...Power On

SmartPower Off

...Power Off

To Turn SmartPower Mode On or Off Using Program Mode

(See Page 7 For Instructions on Using Program Mode)

In Program mode,
go to SmartPower.

Tone

Visual Display

Voice

Two beeps

SmartPower On

SmartPower On

One beep

SmartPower Off

SmartPower Off

Advertising