Cobra Electronics XRS 9740 - Manual (Page 8)

Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
Nothing Comes Close to a Cobra ® 11
Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
10 English
Settings
•
IntelliShield Highway/City Modes
Your detector is equipped with IntelliShield false signal rejection technology
which consists of a Highway mode and three different levels of City modes:
City X, City X Beep Off and City X+K. City X mode sounds a single beep when
the signal is first detected. City X Beep Off mode prevents all X band audio
alerts until the signal strength reaches Level 3. City X+K mode combines the
City X mode with prevention of K band audio alerts until the signal strength
reads Level 2. This will reduce false alerts while you are driving in or near
urban areas where there are many sources for conflicting X or K band signals
such as microwave towers and automatic door openers. The factory setting
is Highway. The factory City mode default setting is City X.
Setting City Default
You can set the default level for City mode (City X, City X Beep Off and
City X+K) either in Program mode or directly using the Set/City button.
Set/City Button
Press and release
City Mode
Highway Mode
N W h
N W c
To Change From Highway Mode to City Mode
Press and
release the
Set/City button. Tone Visual Display Voice
One beep c appears in
the display City X or City X Beep
Off or City X, K
To Change From City Mode Back to Highway Mode
Press and release
the Set/City
button again. Tone Visual Display Voice
Two beeps h appears in
the display Highway
To Set the City Mode Default Directly Using the Set/City Button
Press and hold the
Set/City button. Tone or Voice Visual Display
One beep each time the
display cycles Cycles — see chart above
Release the Set/City
button to select the
current display as
default. None City X Beep Off,
City X+K or City X
To Set the City Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to City. Tone Visual Display Voice
One beep City X Beep Off City X Beep Off
One beep City X+K City X, K
Two beeps City X City X
Press and
hold the
Set/City
button
City
X+K
City X
City X
Beep Off
NOTE
When you change to City mode, the unit will enter
whichever city default mode is set at the time.
Intro Operation Customer
Assistance Warranty
Notice
Main Icons
Secondary Icons
City X Beep Off
City X
Beep Off
City X+K
City X+K
City X
City X
Set/City Button
Press and hold