CyberResearch PCIDIO 48H - Manual (Page 48)

C/C++ Libraries
• 39
5.8 Set Interrupt Control
@ Description
This function is used to set the interrupt configuration. The interrupt
should be configured before the function starts.
@ Syntax
C/C++ (DOS)
void _ DIO48H _Set_INT_Control(U16 cardNo, U16
ctrlValue);
void _ DIO96H _Set_INT_Control(U16 cardNo, U16
ctrlValue);
C/C++ (Windows 95)
void W_ DIO48H _Set_INT_Control(U16 cardNo, U16
ctrlValue);
void W_ DIO96H _Set_INT_Control(U16 cardNo, U16
ctrlValue);
Visual Basic (Windows 95)
W_ DIO48H _Set_INT_Control (ByVal cardNo As Integer,
ByVal ctrlValue As Integer)
W_ DIO96H _Set_INT_Control (ByVal cardNo As Integer,
ByVal ctrlValue As Integer)
@ Argument
cardNo: card number to select board
ctrlValue: the valid values of configuring the
interrupt
are
INT1:
0x00
à disable
0x01
à mode1
0x02
à mode2
0x03
à mode3
INT2:
0x00
à disable
0x04
à mode1
0x08
à mode2
0x0c
à mode3
Please refer to the section 4.3.4 for detailed description.