Coleman 5075 Series - Manual (Page 9)

ENGLISH
Continued
9
To Stop Heater
1. Tightly close valve on propane tank(s).
2. Wait a few seconds. Heater will burn gas left in hose.
3. Unplug heater.
OPERATION
Continued
WARNING
Disconnect heater from propane supply tank(s) before storage.
1. Store propane tank(s) in safe manner. See Chapter 5 of Standard for Storage and
Handling of Liquefied Petroleum Gases, ANSI/NFPA 58. Follow all local codes.
2. Place plastic cover caps over brass fittings on inlet connection and hose/regulator
assembly of heater.
3. Store heater in a dry, clean, and safe place.
STORAGE
WARNING
Never attempt to service heater while it is plugged in, connected to propane
supply, operating or hot. Severe burns and electrical shock can occur.
1. Keep heater clean. Clean heater annually or as needed to remove dust and debris. If
heater is dirty or dusty, clean heater with a damp cloth.
2. Inspect heater before each use. Check connections for leaks. Apply mixture of liquid
soap and water to connections. Bubbles forming show a leak. Correct all leaks before
using heater.
3. Inspect propane hose/regulator assembly before each use. Replace hoses that have
excessive wear, abrasion, or cuts. Inspect “O” ring for damage. Replace if cut or
cracked.
4. Have heater inspected yearly by a qualified service person.
5. Keep inside of heater free from combustible and foreign objects.
MAINTENANCE