Canon BJC-3000 - Manual (Page 10)

8
Parts and Functions of the Printer
Front View
Paper Guide
Ensures that the sheets from the stack in the auto sheet feeder feed straight into the printer. Always align this guide with the
left edge of the paper loaded in the auto sheet feeder.
Paper Rest
Raise to support the paper, especially a larger paper size.
Auto Sheet Feeder
Holds sheets of paper or other media for printing. The auto sheet feeder holds multiple sheets which are automatically fed
into the printer one sheet at a time.
Front Cover
Open to install, replace or switch the BJ Cartridges, or to remove a paper jam.
Paper Output Tray
Holds printed sheets after they are ejected from the printer.
Operation Panel
POWER button
Press to switch the printer on and off.
POWER lamp
Lights to indicate the status of the printer.
Off : Printer power off.
On (green) : Ready for operation.
Flashing (green) : Standby status or print job in progress.
Flashing (orange) : Printer error. Remove the cause of the error before printing is resumed.
Flashing (Flashes orange and : Service error. Contact a Canon service facility.
green alternately.)
RESUME button
After you have removed the cause of a printer error, press the RESUME button to resume printing.
Press and hold the RESUME button for the required number of flashes and release to perform these special tasks.
One flash: Cleans the print head.
Two flashes: Prints a nozzle check pattern.
Three flashes: Cleans the paper feed rollers.
These important tasks can also be performed with the printer driver.
Paper Thickness Lever
Adjusts the gap between the print head and the surface of the paper for the type of paper you are printing on.
Paper Guide
Front Cover
Paper Thickness Lever
POWER button RESUME button
POWER lamp
Operation Panel
Paper Output Tray
Paper Rest
Auto Sheet Feeder