Sears Vacuum Cleaner - Manual (Page 10)

3
AG CHANGING
WARNING!
Unplug power cord
from electrical outlet.
TO REMOVE BAG:
Squeeze the dust
cover release and
pull forward on the
top of the dust
cover to remove
the cover.
Lay cover
aside. '
Grasp the dust bag
collar and pull gen­
tly, carefully remov­
ing the dust bag.
Throw away the
used dust bag. Do
not reuse.
A CAUTION
NEVER REUSE A DUSTBAG. Very fine materials, such
as carpet fresheners, face powder, fine dust, plaster,
soot, etc. can clog the bag and cause it to burst .
before it Is full. Change bag more often when
vacuuming these materials.
Check the dirt
tube and the
motor safety filter.
If either is
blocked, check
the Troubleshoot­
ing chart.
TO REPLACE BAG:
Fold the safety
seal tab on the
new dust bag
away from the
opening that fits
on the dirt tube.
(NOTE: See page
3 for Dust Bag #.)
Unfold the new
dust bag.
Insert the dust bag
onto the bag holder
completelyby hold­
ing the bag collar
and pushing it onto
the dirt tube.