Do-it-yourself” oven temperature adjustment – Sears KENMORE 45520 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

u

DO-IT-YOURSELF” OVEN TEMPERATURE ADJUSTMENT

You may feel that your new oven cooks differently than

the oven It replaced. We recommend that you use your

new oven a few weeks to become more familiar with It,

following the times given in your recipes as a guide.

Your oven has been preset to maximize cooking
efficiency. If you think your new oven Is too hot
(burning foods), or not hot enough (foods are under­
cooked) you can adjust the temperature yourself. The

appearance and texture of foods is a better indicator of
oven accuracy than an Inexpensive oven thennometer.

We do not recommend the use of inexpensive

thermometers, such a s those found in the grocery
store, to readjust the temperature setting of your
new oven. These thermometers can vary by 20°-40‘’F.
Also, you must open the oven door to read the
thermometer and this changes the temperature of the
oven.

T

0

decide how much to change the temperature, set the

oven temperature 25^F higher (If foods are under­
cooked) or 25°F lower (If foods are burning) than the

temperature in your recipe, then bake. The results of
this “test" should give you an idea of how much the
temperature should be changed.

To adjust temperature follow these instructions:

Press the BAKE pad.

2.

Press the IIP arrow pad to select a

temperature between 500°F and 550°F.

c

3 c

L

Use the UP pad to Increase temperature. Press the

down arrow pad to decrease the temperature.

The temperature can be adjusted up to +35‘’F hotter
or -35“F cooler.

SET BETWEEN -35®F

AND +35‘‘F

YOU

HAVE

SELECTED

SHOWN IN THE DISPLAY

IS

5.

When you have made the adjustmem, push the

CLOCK pad to return the display to the time of day.
Use your oven as you would normally.

CLOCK

NOTE:

This

adjustment

will

not

affect

Broil

or

Clean

temperatures.

It

will

be

remembered

when power is removed.

3.

IMMEDIATELY, press and hold the BAKE pad for

about 4 seconds. This display will show “ON” and
"BAKE” will flash in the display.

20

NESER103

Advertising
This manual is related to the following products: