Assembly, Warning, Wands – Sears CO1ZARD10UOO-4370537 User Manual
Page 6: Power-mate
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
Before assembling your vacuum cleaner, be
sure you have all parts shown in PARTS
AND FEATURES„
WARNING
Electrical Shock Hazard
no NOX mittfi lini’A
ctii^nhi
U\tf 11V# I ^IU^ Ii 11,^
wUIjfJ*J
until assembly is complete. Failure
to do so could result in electrical
shock or injury.
WANDS
Slide wands
together until
wand button
snaps into place.
Turn wand button
to the slotted
area of the wand
swivel.
The swivel allows
you to turn the
handle to the left
side to reach far
ther under low
furniture,
POWER-MATE
TM
1. Insert wands into poWER-MATE™ until
the wand buttons snaps into place.
2, Connect
POWER-MATE™
plug and cord as
shown,
DO NOT
force. Raised area
of plug must be
toward hand.
3. Secure cord
cord holder on
wand swivel.
nto
To remove; Disconnect cord and step on
wand release pedal, then puil up on wands.