Asserribly – Sears 113.20765 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
asserribly
3. For plain-end blades, remove blade holders {with
blade installed) from retainer clips by pulling
clips away from blade holders. Pull out upper and
lower blade holders Place blade holder assembly
in blade holder pockets with set screw side
upward -
4 Use set screw wrench to remove set screws in
blade holders, and remove blade.
5 For pin type blades, place blade holder keys as
shown on blade holders before releasing tension
6 After blade tension is released, pull blade out of
upper and lower blade holders, remove blade
holder keys and blade holders
BLADE
HOLDER
PIN-BLADE
SLOT
UPPER ARM
12
Advertising
This manual is related to the following products: