1 - 800 - 366 - part, Remote installation location – Sears WaterWorks RO 2000 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
- REMOTE INSTALLATION LOCATION
INSTALLING RO ASSEMBLY, AND/OR SUPPLY SADDLE VALVE IN REMOTE LOCATION
Longer lengths of tubing are available from Sears
(see page 19) for installing the RO assembly, and/or
water supply saddle valve away from the RO faucet.
Examples: in the basement, under the kitchen or
bathroom sink. In a closet or room nearby the kit
chen or bathroom.
You can run the RO assembly drain tubing direct-
stand pipe drains. It is very important to keep the
end of the RO drain tubing at least 1-1/2" above
the drain point. This provides an air gap to prevent
a back-siphon of sewer water.
Omit the following steps:
- all of step 2, pages 6 and 7.
- steps C7 and C8, page 9.
When ordering parts, always provide the following information:
♦ Product Type:
Waterworks'^ Undersink Reverse
Osmosis
Drinking Water System
♦
Model: RO 2000
♦ Part Number:
from page 19
♦ Part Description:
from page 19
For the repair or replacement parts you need
Call 7 am - 7 pm, 7 days a week
1 - 800 - 366 - PART
(1 - 800 - 366 - 7278}