Sears Refrigerator - Manual (Page 15)

Fresh food door Rehanging the fresh food door
(o) Transfer two screws in bottom left of door to
opposite side, if handle is long, wait until handle is
moved before reinstalling front screw.
(b) Remove two screws holding handle to top of door.
(e) Remove handle plug, using putty knife, and
remove screw underneath.
(d) Remove handle.
(&) Transfer two screws from handle holes in top
right of door to opposite side.
(f) Transfer plug button in top left of door to opposite
side.
(g) Transfer plug button on right front of door to
handle hole vacated by removal of screw under
handle plug.
(h) Reassemble handle to right side of door, if
handle is long, use front screw removed in Step (a) to
attach handle to bottom of door.
(o) Lower the bottom
socket of the fresh food
door onto the pin on the
bottom hinge bracket. Be
sure the washer is in
place.
(b) Tilt the door towards
the cabinet ond gently
push the door under the
center hinge bracket and
align with the hole in the
center hinge bracket.
(c) Reinstoil the hinge
pin with o 3/8" socket
and ratchet so it extends
through the hole in the
center hinge bracket and
into the socket on top of
the fresh food door.
RehangIng the freezer door
(a) Lower the bottom socket of the freezer door onto
the center hinge pin. Be sure the washer is in place.
(b) Tilt the door towards the cabinet, lifting the top
hinge so the pin fits into the socket on top of the door.
(e) Tighten the top hinge screws after supporting the
door on the handle side and aligning so the gap
between the doors is even oil ocross the front.
(d) Replace the hinge cover.
15