Canon 210 - Manual (Page 119)

119
Protecting Images
Choosing Images Individually
Choose [Select].
● Follow Step 2 on p. 118 to touch [Select].
Choose images.
● Drag horizontally on the screen to choose
an image, then touch the screen.
X Once set, will appear on the screen.
● Touching the screen again deselects the
image, and
disappears.
● To choose multiple images, repeat the
above operation.
Protect.
● If you touch Ú, a confirmation screen will
appear.
● Touch [OK].
X The images will be protected.
Choose All Images
Choose [All Images].
● Follow Step 2 on p. 118 to touch [All
Images].
Protect images.
● Touch [Protect].
If you switch shooting modes or turn off the power before performing the
operations in Step 3, images will not be protected.
You can unlock groups of protected images if you choose [Unlock] in
Step 2.