Changing the color and shooting, Osen in color accent, P. 95) – Canon 210 User Manual
Page 95: Color accent, Choose t, Touch, Specify the color, Specify the range of colors
95
Changing the Color and Shooting
You can change the look of an image when shooting. However, depending
on shooting conditions the image may become coarse, or the colors may not
come out as expected.
Color Accent
You can choose to retain a single color and change the rest to black and
white in a composition.
Choose
T.
●
Follow Steps 1 – 2 on
to choose
T.
Touch .
X
The unchanged image and the Color
Accent image will both display.
●
The color for default settings is green.
Specify the color.
●
Position the center frame so it is filled with
the color you want and touch the frame at
the bottom part of the screen.
X
The specified color will be recorded.
Specify the range of colors.
●
Touch
op to change the range of colors
to be retained.
●
Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar
colors.
●
Touching
Ú restores the shooting screen.
Recorded color
Using the flash may cause unexpected results in this mode.