Canon 210 - Manual (Page 139)

139
Changing Camera Settings
Changing the Start-up Screen
You can change the start-up image that appears on the screen when you
turn on the camera.
● Touch [Start-up Image].
● Touch an option.
Registering Recorded Images as the Start-up
Screen
When you press the 1 button and set the camera to Playback mode, you
can register recorded images.
● Touch [Start-up Image].
● Touch [2], then touch .
● Drag horizontally across the screen to
choose an image, then touch [OK].
X The [Register?] screen will appear.
● Touch [OK].
No start-up image.
1
Preset images.
(cannot be modified)
2
Preset images.
You can set recorded images, and use the
included software to change the images.
Any previously registered start-up image will be overwritten when
registering a new start-up image.