Lubrication, Recommended accessories, Lubrication recommended accessories – Sears 113242502 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LUBRICATION
The saw motor bearings have been packed at the factory
with proper lubricant and require no additional lubrication
1 Lay the saw on its LEFT SIDE.
2
Clean the following parts with Craftsman Gum and
Pitch Remover: BEVEL GEARS, ELEVATION WORM
AND TEETH, TILT WORM AND TEETH,
Lubricate these parts and other bearing points indicated,
with SAE No 20 or No. 30 engine oil
The following parts should be oiled occasionally with SAE
No, 20
OF
No, 30 engine oil
Bearing points In guard assembiy and rip fence
GUARD
FENCE
# BEARING POINTS
RECOMMENDED ACCESSORIES
ITEM
CAT., NO.
Casters .................................. ............ 9-22222 or 9-22221
7 In, Molding Head Set ................ .............. ..............9-3217
7 in,. Molding Head Set ................... ........................ 9-3218
7 In. Molding Head .......................................... , , 9-3214
Dado/Molding Insert for 7 in,
Dia- Molding or Dado Head .................. .............. 9-29997
Work Light .
..
......................................... 9-2480
Work Light ....................... ........................................ 9-2481
? in. Dia. Adjustable Dado Head .......... ......... , ................. 9-3263
ITEM
CAT. NO.
7 In. Dia,. Dado Head ............................................. 9-3257
Sanding Wheel .................................................... 9-22723
Miter-Gauge Stop Rods ........................................ 9-29924
Miter-Gauge Hoid-Oown Clamp .......................... 9-29928
Taper .Jig .......... ,,
...................... 9-3233
Universal Jig ......................................................... 9*3235
Power Took Know How Handbook
Table Saw .......................................................... 9-2918
27