Sears 390.306062 - Manual (Page 7)

13. Reinstall battery clamps;
A. Black switch wire clamps to positive battery terminal.
B. Black pump wire clamps to negative battery terminal.
NOTICE: DO NOT reverse terminal connections.
14. Tum pump upside down; unclip and remove screen. Do
not remove screw-mounted bottom plate. lift switch to
momentarily "bump” pump. Check for correct operation
and rotation (ptimp must rotate counter-clockwise
when looking at end of shaft - Figure 8). If not, reverse
wires to battery and recheck.
15. Replace screen.
16. Plug in charger to wall outlet.
17. Fill sump with water and check switch action. Adjust
tether if necessary.
A CAUTION lix) NCyr test run pump for more than
5 seconds without water in it. Running pump dry for
extended periods could damage pump and voids war­
ranty.
Craftsman Battery Backup Sump Pump
Model 390.306062
Negative Battery Clamp
Positive Battery Clamp
CZZ]
цицицуицициишшг
1412 1194
REPAIR PARTS LIST
Key No. Part No. Part Description
1 PS217-5E Switch Assembly #
2 PS17^1 Pump Complete***
3 CC0030-13 Cord Clamp
4 U17-1148 Fuse Holder
5 U17-1149 15-Amp Time-Delay Fuse (2 supplied t)
6A
**
Wire Terminal (4 Req.)
6B
**
Battery Terminal Clamps (2 Req.)
*
PS17-100 Battery Case (includes strap and strap brackets)
7 PS117-77A Charger***
8 PS22-1 Check Valve
9
**
Hose Clamp Г min. - 2“ max. S.S.
10 PS78-3P Pipe Adapter
11 U78-846P Tee 1-1/2 X 1-1/2 x 1-1/4 PVC
12 U78-876P Reducer Bushing (2 Req.)
# When ordering, also order Key Nos. 4 (Fuse Holder) and 5 (Fuse) required for installation.
* Not illustrated.
** Standard Hardware Item; purchase locally.
"* No component parts available for pump or battery charger,
t Second fuse is supplied as spare.