Sears 629.42869 - Manual (Page 10)

Grilling
Installation
The grill accessory consists of two black grill grates, a grill element, and two grill-rocks.
To InstaU Grill
1. Before installing grill components, be certain
controls are OFF.
2. Place the two grill-rocks into an empty basin pan
with their handles running parallel to the front of
the cooktop. These grill-rocks must be used since
they support the grill element.
3. Position the grill element with the terminal plug
towards the terminal receptacle. This receptacle is
located at the front of the left side and at the back
of the right side of the cooktop. Slide the element
towards the receptacle until the terminal plug is
completely engaged. The grill element should now
rest on the handles of the grill-rocks.
4. Place the black grill grates on the top of the
cooktop.
To Remove Grtll
1. Be sure controls are OFF.
components once they are cool.
Remove grill
2. To remove grill element, pull away from receptacle
until it is unplugged. (Note: Lifting the element
more than 2 inches above the cooktop surface
while it is engaged in the receptacle could damage
the terminal plug.)
Installing Griddle
1. Remove the two black grill grates from the grill.
2. Review the instructions for installing and using the
griddle that are packaged with the griddle.
Note: Accessory options are shown on page 3.
10