Features and controls, Dc in connector, Operate/charge select switch – Tascam DA-P1 User Manual
Page 14: Power switch, Cassette holder, Eject button, Analog input switch, Phantom (+48v) switch
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Features and Controls
11
12
13
14
Left Side Pane!
Top Pane!
1. DC IN connector
For connection to the provided PS-Dl adaptor only.
2. OPERATE/CHARGE select switch
Set to OPERATE for the deck to be operated (using
AC current or battery), or CHARGE for charging the
battery.
NOTE
If this switch is NOT set to OPERATE, all other
switches and buttons cannot operate.
3. POWER switch
Slide to the right to switch on power to the deck.
If you do so while holding down STOP (when the
deck is battery powered), the Auto Power Off feature
(p.6) is defeated.
4. Cassette holder
For loading DAT cassettes only. Conventional audio
cassettes are not accepted.
5. EJECT button
Press to open the cassette holder. Effective only when
the CHARGE/OPERATE switch is set to OPERATE
and the transport is in STOP or the deck is turned off.
When pressing EJECT, the tape counter (shown or
hidden) is reset to 0000 and the MARGIN reading is
cleared.
6. ANALOG INPUT switch
When using inputs to the MIC/LINE IN XLR
connectors, set to MIC if the source is a mic or PAD
20 dB to attenuate the mic inputs, or set to LINE for
recording from line level sources.
7. PHANTOM (+48V) switch
Set to ON when using phantom powered mics. When
setting the ANALOG INPUT switch to LINE, the
phantom power is automatically switched off.
14