Troy-Bilt 15009 - Manual (Page 8)

MAINTENANCE AND STORAGE
1. Keep the tiller, attachments and accessories
in safe working condition.
2. Check all nuts, bolts, and screws at frequent
intervals for proper tightness to be sure the
equipment is in safe working condition.
3. Never store the tiller with fuel in the fuel tank in­
side a building where fumes may reach an open
flame or spark (hot water and space heaters, fur­
naces, clothes dryers, stoves, electric motors, etc.).
4. Allow the engine to cool before storing it.
5. To reduce the chances of a fire hazard, keep the
engine free of grass, leaves, or excessive grease.
6. Store gasoline in a cool, well-ventilated area,
safely away from any spark or flame-producing
equipment. Store gasoline in an approved con­
tainer, safely away from the reach of children.
7. Refer to the Tiller and Engine Maintenance
section of this Manual for instructions if the tiller is
to be stored for an extended period.
8. Never perform maintenance while the engine
is running or the spark plug wire is connected, ex­
cept when specifically instructed to do so.
9. If the fuel tank has to be drained, do this out­
doors.
DECALS
If any of the decals below become illegible, damaged, or missing, contact us or your authorized
dealer immediately for a replacement. Use the appropriate part number noted in your Parts Catalog.
Control Panel Decal
(located on upper handlebars);
All Models Starting Stabilization Decal
(on top of engine or on air cieaner)
Ail Models
Warning - Belt Positions
(on beit cover - not shown)
Econo-Horse Model only
Photo 1-1: Pony Model shown