Clarion DXZ275MP - Manual (Page 15)

English
13
DXZ275MP/DXZ375MP
Radio Operations
Listening to the radio
1. Press the [ SRC ] button and select the radio
mode. The frequency appears in the display.
2. Press the [ BND ] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜
F1 (FM1)...
3. Press the [ x ] or [ v ] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [ BND ] button and select the
desired band (FM or AM).
∗ If “ MANU ” is lit in the display, press and hold
the [ BND ] button for 1 second or longer.
“ MANU ” in the display goes off and seek
tuning is now available.
2. Press the [ x ] or [ v ] button to
automatically seek a station.
When the [ v ] button is pressed, the station
is sought in the direction of higher
frequencies; if the [
x ] button is pressed,
the station is sought in the direction of lower
frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [ BND ] button and select the
desired band (FM or AM).
∗
If “ MANU ” is not lit in the display, press and
hold the [ BND ] button for 1 second or longer.
“ MANU ” is lit in the display and manual tuning
is now available.
2. Tune into a station.
● Quick tuning
Press and hold the [ x ] or [ v ] button for 1
second or longer to tune in a station.
● Step tuning
Press the [ x ] or [ v ] button to manually tune
in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[
DIRECT ] button or the [ w ] / [ z ] button recalls
the stored radio frequency automatically.
1. Press the [BND] button and select the
desired band (FM or AM).
2. Press the corresponding [DIRECT] button or
the [ w ] / [ z ] button to recall the stored
station.
Note:
• Press and hold one of the [DIRECT] buttons for 2
seconds or longer to store that station into preset
memory.
Manual memory
1. Select the desired station with seek tuning or
manual tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Press the [BND] button and select the
desired band (FM or AM).
2. Press and hold the [ ] button for 2 seconds
or longer. The stations with good reception
are stored automatically to the preset
channels.
DXZ375MP_EN.book 13 ページ ２００６年１１月１０日 金曜日 午後１時１５分