English 16, Caution, Cd/mp3/wma operations – Clarion DXZ275MP User Manual

Page 18: Disc-in-play function, Ejecting a cd, Listening to a disc already loaded in the unit, Loading a cd

Advertising
background image

CD/MP3/WMA Operations

English

16

DXZ275MP/DXZ375MP

Set the type of file to be played
(multi-session function)

When a single disc holds both normal CD type
tracks and MP3/WMA type tracks, use this
command to select which type of track to play.

Default setting is “

M-SESS CD

”.

• When only one type of track (either music CD

or MP3/WMA) is recorded on a disc, selecting
either type will allow playback of the disc.

• When playing CCCD (copy-control CDs), set

to CD type.

1. Press and hold the [

BND

] button for 1

second or longer.

Each time the button is held pressed in this
way “

M-SESS

” will be displayed for 1

second, then “

CD

” or “

MP3

” appears in the

display, the playback type alternates
between CD type and MP3/WMA type.

• M-SESS CD

When playing music CD only.

• M-SESS MP3

When playing music MP3/WMA only.

2. When setting is completed, remove the disc

and reinsert it.

Disc-In-Play function

As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn
the power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.

CAUTION

• Do not try to put your hand or fingers in

the disc insertion slot. Also never insert
foreign objects into the slot.

• Do not insert discs where adhesive comes

out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.

Ejecting a CD

1. Press the [

Q

] to eject the CD. Take it out

from the ejected position. “

EJECT

” appears

in the display.

Notes:

• If a CD (12 cm) is left in the ejected position for 15

seconds, the CD is automatically reloaded. (Auto
reload)

• If you force a CD into before auto reloading, this

can damage the CD.

Listening to a disc already loaded
in the unit

Press the [

SRC

] button to select the CD/MP3/

WMA mode.

When the unit enters the CD/MP3/WMA mode,
play starts automatically.

If there is no disc loaded, the indication “

NO

DISC

” appears in the display.

The mode changes each time the [

SRC

] button

is pressed. (Modes are not displayed for
equipment that is not connected.)

Radio

(Satellite radio)

CD/MP3/WMA

(iPod BB)

(CD changer)

(DVD changer)

(TV)

AUX

Radio ...

Loading a CD

1. Insert a CD into the centre of the CD SLOT

with the labeled side facing up. “

LOADING

appears in the display, the CD enters into the
slot, and the play starts.

Notes:

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may
require service.

• Discs not bearing the

or

mark and

CD-ROMs cannot be played by this unit.

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

DXZ375MP_EN.book 16 ページ 2006年11月10日 金曜日 午後1時15分

Advertising
This manual is related to the following products: