Clarion DXZ275MP - Manual (Page 26)

English
24
DXZ275MP/DXZ375MP
Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET
cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Radio Receiver: XMD1000
• XM Smart Digital Adapter: XM SDA
• SIRIUS Satellite Radio Receiver: SIRCL2,
SIRCL3
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by the
following notations:
“XM”: for an XM Satellite Radio Receiver
“SIRIUS”: for a SIRIUS Satellite Radio Receiver
Selecting a Satellite Radio mode
1. Press the [ SRC ] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [ BND ] button to select a band.
This changes the reception band as follows:
• XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...
• SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...
● Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time
or after a reset: “ UPDATING ”
• When a channel is being tuned in (no signal is
yet received):
XM: “ LOADING ”, SIRIUS: “ LINKING ”
• A channel without a broadcast has been
selected:
XM: “ – – – CH ”, SIRIUS: “ INVLD CH ”
• A channel not covered by your contract:
XM: “ UPDATING ”, SIRIUS: “ CALL 888 ” ↔
“ 539-SIRI ” (alternated)
Confirming your SIRIUS ID
1. Press and hold the [ D ] button for 1 second or
longer to display the ADJUST item.
2. Press the [ x ] or [ v ] button to select “ SID
DISP ”.
3. Press the [ ] button, the display will
display the upper 6 digits.
4. Press the [ w ] or [ z ] button to switch
between the display for the upper 6 digits
and lower 6 digits.
5. To return to the previous mode, press the [ D ]
button.
Displaying channel labels
1. Press the [ D ] button to select the desired
channel label.
Channel ➜ Category ➜ Title ➜ Artist ➜
Radio text ➜ Channel...
Channel selection
1. Channels are selected with the [ x ] or
[ v ] button.
∗
For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode
There are two channel selection modes: quick
tuning mode and step tuning mode.
● Quick tuning
1. Press and hold the [ x ] or [ v ] button for
1 second or longer.
● Step tuning
1. Press the [ x ] or [ v ] button.
Recalling a preset station
A total of 18 satellite radio stations can be
stored.
• XM: 6-XM1, 6-XM2 and 6-XM3
• SIRIUS: 6-SR1, 6-SR2 and 6-SR3
This allows you to store your favorite satellite
radio stations in memory for later recall.
1. Press the [BND] button to select the desired
band.
2. Press the [ w ] / [ z ] button or [DIRECT]
button to select the desired preset station.
DXZ375MP_EN.book 24 ページ ２００６年１１月１０日 金曜日 午後１時１５分