Safety rules, Limited warranty – MTD 243-723A User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

LIMITED WARRANTY

MTD will replace, upon examination by the factory or an authorized agent, any part or parts

found to be defective in material or workmanship free of charge. All transportation and
freight charges incurred in shipping a defective generator or generator part to the factory or
authorized agent shall be paid by the claimant (buyer).

The replacement of parts and/or service arising out of the abuse, accident, attempted repair
by unauthorized persons, tamperings, or improper use are not covered by the operation of
this warranty.

There is no warranty on brushes, fuses, or receptables, nor does this warranty cover power
units or engines. Such power units or engines are covered exclusively by the warranties or
their manufacturer.

This warranty is extended to the original purchaser for a period of one year (365 days) from
date of purchase; provided, however, that none of the language of this warranty shall be
construed to exclude third party beneficiaries from its operation. This warranty is limited to
a period of ninety (90) days if said unit is used in commercial use.

The user shall determine the suitability of the product for its intended use prior to placing the

unit in service. Said user assumes all risk and liability in connection with determining the
suitability of the unit for its particular use. Neither seller nor manufacturer shall be liabile
for any injury, loss or damage arising out of the improper use or operation of said unit.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE

FACE HEREOF.

SAFETY RULES

Safety precautions are essential when any electrical or
mechanical equipment is involved. These precautions
are necessary when using, storing, and servicing
electro-mechanical equipment. Using this equipment
with

the

respect

and

caution

demanded

will

considerably lessen possibilties of personal injury. If
safety precautions are overlooked or ignored, personal
injury may occur.

This unit was designed for specific applications. It
should not be modified and/or used for any application
other than which it was designed. If there are questions
regarding its applications, write or call. Do not use
this unit until you have been advised.

KEARNEY DIVISION

Box 364, Airport Road Kearney, Nebraska 68847

Phone 308-237-2181

1.

Read your manual carefully-know your equip­

ment. Consider the applications, and the potential
hazards peculiar to your unit.

2.

Equipment must be placed on a firm supporting

surface. Ground unit by utilizing the special
grounding lug provided.

3.

Load must be kept within stated rating (see

nameplate) - overloading will damage unit or

shorten its life.

4.

Engine must not be run at excessive speeds.

Operating an engine at excessive speeds increases

the hazard of personal injury. Do not tamper
with parts which may increase the governed speed.

5.

To prevent accidental starting, always remove the

spark plug before working on the engine or
generator, or remove cable from the spark plug.

6.

Units with broken or missing parts; without pro­

tective housing or covers, should never be operated.
Contact your service center for replacement parts.

7.

Units should not be operated or stored in wet or

damp conditions (rubber gloves and footwear are
recommended wh6n operating any electrical
equipment

outdoors

or

in

damp

indoor

conditions).

Advertising
This manual is related to the following products: