CyberResearch UCERB 24 - Manual (Page 12)

Connecting a UCERB 24 to your computer is easy
Installing a data acquisition device has never been easier.
ƒ The UCERB 24 relies upon the Microsoft Human Interface Device (HID) class drivers. The HID
class drivers ship with every copy of Windows that is designed to work with USB ports. We use the
Microsoft HID because it is a standard, and its performance delivers full control and maximizes data
transfer rates for your
UCERB 24. No third-party device driver is required.
ƒ You can connect the UCERB 24 before or after you install the software, and without powering
down your computer first. When you connect an HID to your system, your computer automatically
detects it and configures the necessary software. You can connect multiple HID peripherals to your
system using a USB hub.
ƒ You can connect your system to various devices using a standard four-wire cable. The USB
connector replaces the serial and parallel port connectors with one standardized plug and port
combination.
ƒ Data can flow two ways between a computer and peripheral over USB connections.
UCERB 24 CyberResearch
®
Digital I/O
4 ©Copyright 2005 CyberResearch, Inc.