Christie Digital Systems XENON CONSOLE - Manual (Page 10)

S L C S e r i e s X e n o n C o n s o l e
2-2 CHRISTIE DIGITAL SYSTEMS
August 7, 2003
2.2. A
L L O W
L
A M P T O
C
O O L
WARNING
If the lamp has been in use, wait at least ten minutes after shut-off
before opening the lamp housing.
The ten-minute waiting period allows the internal lamp pressure to drop to a level at which it
is safe to work while wearing the authorized protective clothing. Again, always wear
protective clothing when the protective cover is removed from the lamp.
2.3. D
I S C O N N E C T
AC L
I N E S
B
E F O R E
E
N T E R I N G
C
O N S O L E
WARNING
Turn off the breaker at the building AC power distribution panel before
entering the console.
Always turn off and disconnect power lines before entering the console. This protects
against accidental electrical shock.
2.4. D
O
N
O T
L
O O K
D
I R E C T L Y A T
L
A M P
WARNING
N E V E R L O O K D I R E C T L Y A T T H E L A M P !
Serious and permanent eye damage can be caused by the ultraviolet radiation of the lamp.
Never attempt to open the console while the lamp is on. Always follow directions for
opening console and exposing the Xenon lamp. (See Section 5.2.)