Garmin eTrex Legend Cx - Manual (Page 56)

46 eTrex Venture Cx and Legend Cx Owner’s Manual
M
AIN
P
AGES
> M
AP
P
AGE
Measuring Distance
You can measure the distance between two map items.
To measure distance between two points:
1. Press the Menu key to open the Map Page
Options Menu.
2. Highlight Measure Distance, and press Enter.
An on-screen arrow appears on the map
display at your current location with REF below
it.
3. Move the arrow to the reference point (the
starting point you want to measure from), and
press Enter. A push pin icon marks the starting
point on the map.
4. Move the arrow to the point you want to
measure to. The distance between the two
points is shown in the upper-right corner of the
Map Page.
5. Press Quit to cancel.
Push pin
indicating the
beginning
point of the
measurement
End point of
measurement
labeled REF
Measured
distance