Garmin nuvi 800 - Manual (Page 56)

0 nüvi 800 Series Owner’s Manual
Customizing the nüvi
nOTe: You do not need to activate
the subscription included with your
FM traffic receiver (if it came with
one). The subscription activates
automatically after your nüvi acquires
satellite signals while receiving traffic
signals from the service provider.
1. From the Menu page, touch Tools >
Settings > Traffic .
2. For Non-North American units, touch
Subscriptions > Add . For North
American units, touch Add .
3. Write down the FM traffic receiver
unit ID.
4. Go to www.garmin.com/fmtraffic to
purchase a subscription and get a
25-character code.
5. Touch Next on the nüvi, enter the
code, and touch Done .
The traffic subscription code cannot be
reused. You must obtain a new code each
time you renew your service. If you own
multiple FM traffic receivers, you must
obtain a new code for each receiver.
Adjusting Backup
Camera Settings
The nüvi supports NTSC and PAL
composite video input. Touch Tools >
Settings > Backup Camera .
Switch to Camera—select how the nüvi
switches to the backup camera when
your vehicle is in reverse.
auto—automatically switches to
backup camera mode when the nüvi
detects that your vehicle is in reverse.
Prompt—prompts you to switch
to backup camera mode. When the
prompt appears, touch Yes to view
the backup camera.
never—select to not show the
backup camera. This option requires
you to select View Camera on the
Backup Camera page to view the
backup camera.
Video Format—select a video input.
Select Auto for the nüvi to automatically
•
•
•