Cisco WRTP54G - Manual (Page 46)

Wireless-G Broadband Router with 2 Phone Ports
38 Chapter 5: Configuring the Router
The Applications & Gaming Tab - Port Triggering
Enable. Check the Enable box to enable the services you have defined. Port Range Forwarding will not function
if the Enabled button is left unchecked. This is disabled (unchecked) by default.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes.
The Applications & Gaming Tab - Port Triggering
The Port Triggering screen allows the Router to watch outgoing data for specific port numbers. The IP address
of the computer that sends the matching data is remembered by the Router, so that when the requested data
returns through the Router, the data is pulled back to the proper computer by way of IP address and port
mapping rules.
Port Triggering
Application. Enter the application name of the trigger.
Triggered Range
For each application, list the triggered port number range. Check with the Internet application documentation for
the port number(s) needed.
Start Port. Enter the starting port number of the Triggered Range.
End Port. Enter the ending port number of the Triggered Range.
Figure 5-25: Applications & Gaming Tab -
Port Triggering