Cisco WRTP54G - Manual (Page 61)

Wireless-G Broadband Router with 2 Phone Ports
53 Chapter 5: Configuring the Router
The Status Tab - Voice
The Status Tab - Voice
The Voice screen displays information about your Internet phone line(s).
Information
Voice Version. This shows the version number of the voice firmware currently installed on the Router.
Line1 Status
Registration Status. The phone number and status of this Internet phone line are displayed here, so you know
whether or not the phone line is registered with Vonage. If it is not registered, then you should register it with
Vonage. If the status indicates that the registration has failed, then refer to “Appendix A: Troubleshooting.”
Call1 Status. The status of the active phone call is shown here.
Call2 Status. If you are using call waiting, the status of the incoming phone call is shown here.
Line2 Status
Registration Status. The phone number and status of this Internet phone line are displayed here, so you know
whether or not the phone line is registered with Vonage. If it is not registered, then you should register it with
Vonage. If the status indicates that the registration has failed, then refer to “Appendix A: Troubleshooting.”
Call1 Status. The status of the active phone call is shown here.
Call2 Status. If you are using call waiting, the status of the incoming phone call is shown here.
Click the Refresh button to update the on-screen information.
Figure 5-41: Status Tab - Voice