Basic functions, Nmaking a call – Cortelco Dect 6 Cordless Telephone 8015 User Manual
Page 19
16
35
Modify PIN
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
3. Use
to choose
menu,
press the
soft key.
4. The display shows "
". Enter the current
PIN, then press the
key. If the old PIN
code is correct, you will be prompted to enter
a new PIN code, otherwise a warning beep will
sound and the handset will return to the
menu.
5. Enter the new PIN, press the
key. You
will be requested to confirm the PIN code.
Enter the new PIN again then press the
soft key to confirm and exit.
Modify PIN
Select
PIN?
Next
Modify PIN
Next
Save
1. Press the
soft key.
2. Press
or
key to choose
,
then press the
.
or
key
Menu
BS Settings
Select soft key
BS Reset
BS Settings
Select soft key
If you reset the base, all the features under
menu will be restored to the factory
initial setting: Dial Mode and Flash Time.
3. Press
to choose
menu,
press
the
soft
key.
You
will
be
prompted to enter the PIN code.
4. Enter the PIN code (the default PIN is 0000),
then press the
soft key. If the PIN
code is validated all Base settings will be
reset to the factory default, otherwise the
settings will remain.
After resetting, the handset will return
to standby mode.
BS
Settings
BS Reset
Select
Reset
Result:
1. Press the
soft key.
2. Press
or
key to choose
,
then press the
.
or
key
Menu
Basic Functions
n
Making a Call
You can enter the desired phone number in
standby mode, which allows you to make
corrections before dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits).
Check it. You can also use the
key to
insert a pause.
1. Pick up the handset and press the
key.
3. To end the call, either press the
2. Dial a telephone number.
key
or replace the handset on the base.
Result: The
indicator flashes and the
icon appears on the LCD.
In use
Note
Redial
:
To make a call to the last number you dialed,
use the
feature. For details, see page
17.
Note
Erase
:
If you make a mistake while entering a
number, press the
soft key to clear
the last digit.
2. When the number appears correctly, press
the
key.
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the
key.