Cortelco Dect 6 Cordless Telephone 8015 - Manual (Page 39)

15 36
n HS Settings
Setting Alarm
1. Press the soft key. Menu
You are able to set the alarm on the handset
and adjust the alarm settings.
2. Press or key to choose ,
then press the .
3. Press the soft key to choose
menu.
4. The display shows the current set. Use the
or key to select / , press the
soft key.
5. If you select , the display indicates you
to enter the time in : format. Use
the numeric keypad to enter.
H
Select Alarm
On Off
Select
On
HH MM
S Settings
Select soft key
6. Press the soft key, a beep sounds and
the display shows you can
press or key to enable or disable the
snooze function on the alarm and press the
soft key.
Next
Snooze On/Off,
Save
7. When the alarm sounds, press any key to
stop the ring.
Notes
Snooze On
Snooze Off
:
At step 5 you need to enter the time in 24-
Hour format.
If you press any key at the right time the
alarm to ring, the alarm will be silent.
If you choose
, the alarm will
ring at regular intervals of 11 minutes. If
you press the
key when the alarm
sounds, the option will be switched to
.
When the handset is in power off mode and you
place it on the base, it automatically turns on. To
turn the handset on or off in standby mode,
follow these steps:
1. , press and hold the
key until the display is switched on. While the
handset searches for a base, the signal icon
will flash and the following message will be
displayed.
To turn the handset on
When the handset has found the base, it will
enter the standby mode, the display will show
handset number and the handset name (if you
have one saved as described on page 23), signal
icon, battery icon and current time. If the
handset is unsuccessful in finding a base, the
handset will behave according to the Out of
Range condition.
n Turning Handset On/Off
2. , keep the key
pressed until the display is switched off.
To turn off the handset
Note
YOU SHOULD
FULLY CHARGE THE HANDSET BEFORE
USING.
:
If the battery power is very low when you
place the handset on the base, the following
message will be displayed.
Searching...
Charging...