Nconnecting lines n installing batteries – Cortelco Dect 6 Cordless Telephone 8015 User Manual
Page 42
12
39
n
Connecting Lines
n
Installing Batteries
Slide the battery cover in the direction of the
arrow and pull it out.
Insert new batteries as indicated, matching
correct polarity (+,-).
The rechargeable Ni-MH batteries (AAA size, 1.2V,
600mAh) come with your phone. Install the batteries
before use.
2.
1.
Note:
Reversing the orientation may damage
the handset.
Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a
standard phone wall outlet.
Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC
adapters into a standard AC wall outlet.
1.
2.
To AC wall outlet
To phone wall outlet
HS Reset
If you reset the handset, all the features under
menu will be restored to the factory
initial setting: Alarm, Audio Setup, Ring Setup,
Tone Setup, Language, HS Name, Auto Answer
and Date & Time. But LCD Contrast can not be
restored.
3. Press
to choose the
menu, press the
soft key. You will be
prompted to enter the PIN code.
4. Enter the PIN code (the default one is 0000),
then press the
soft key. If the PIN code
is validated all handset settings will return to
the factory default, otherwise a warning tone
will be heard and the settings will remain.
After resetting, the handset will return to
standby mode.
HS
Settings
HS Reset
Select
Reset
Result:
1. Press the
soft key.
2. Press
or
key to choose
,
then press the
.
or
key
Menu
HS Settings
Select soft key
Selecting a Base
This function allows you to select a base from
those already registered to the handset. You can
access the options by scrolling the menu.
3. Press
to choose
menu, press the
soft key.
4. You can use
to select the base
you want, then press the
soft key. If
you select a non-existent base, the handset
will sound a warning tone.
5. The display will show
. Press the
soft key to confirm. A confirm tone will
be heard.
Select Base
Select
Select
Selected BSX
Select
1. Press the
soft key.
2. Press
or
key to choose
,
then press the
.
or
key
or
key
Menu
HS Settings
Select soft key