If the cooker does not work, Performance characteristics when in use, If you do not have the original carton – Beko D531 User Manual

Page 14: Future transportation, Replacing the oven lamp, Trouble shootincj

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

trouble shootincj

If the cooker does not work

If the appliance does not operate check

whether:

• The power supply is on.

• The fuse has blown/circuit breaker has

tripped/main distribution switch has been

turned off.

• The control has been set correctly.

If the appliance is still not operating after

the above checks, please refer to the section

on how to obtain service.

Please ensure that the above checks have

been made as a charge will be made if no

fault is found.

Performance characteristics when in
use

When using your appliance for the

first few times, an odour and/or

smoke may be emitted which is normal

- see

page 8.

It is normal for the metal parts to produce

noise when in use, this is due to expansion

and contraction.

• When in use, steam may be produced which

is normal and not a fault of the cooker.

• At the end of a cooking session, it is normal

to have a momentary puff of steam when

the oven door is opened. This should disperse

in a few seconds.

• If, whilst cooking, steam produced comes

in to contact with cool surface's on the

outside of the appliance, it will condense

and produce water droplets. This is quite

normal and is not a fault.

future transportation

Keep the original carton and other packaging

material in a safe place. Transport the cooker

in its original carton. Follow the instructions

that are printed on the carton.

To prevent the accessories inside the oven

from damaging the oven door, tape a strip of

cardboard onto the inside of the oven door

that lines up with the position of the trays.

Tape the oven door to the side walls.

If you

do

not have the original carton

Take the necessary precautions in order to

prevent the exterior panels, and the glass

surfaces of the oven from being damaged.

Pack the oven in bubble wrap or thick

cardboard and tape it securely in order to

prevent damage during transportation.

The oven must be transported upright. Do

not place other items on the top of the cooker.

Recycling

This product bears the selective

sorting symbol for waste electrical

and electronic equipment (WEEE).

This means that this product must

be handled pursuant to European

Directive 2002/96/EC in order to

be recycled or dismantled to minimize its

impact on the environment.

For further information, please contact your

local or regional authorities.

Electronic products not included in the selective

sorting process are potentially dangerous for

the environment and human heath due to

the presence of hazardous substances.

replacing the oven lamp

Ensure that the appliance is switched off at

the mains supply before replacing the lamp
to avoid the possibility of electric shock.

1

Switch off at the mains.

2

Remove the protective glass cover of the

lamp inside your oven by turning it anti­

clockwise.

3

Remove the bulb by turning it anti-clockwise.

4

After installing the correct replacement bulb,

reinstall the protective glass of the lamp.

Replacement light bulb can easily be

obtained from a good local electrical or DIY

store.

14

Advertising