Over heat protection, Operating the hob – Beko D531 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
operating the hob
1
Rotate the control knobs in either
direction to provide fully variable heat
control.
2
When any one of the hotplates is on, the
red indicator light on the control panel is
on.
3
To switch a hotplate off turn the
corresponding knob to 0 (zero).
• Rapid heating hotplates are at the front
and are denoted by a red spot in the
centre of each hotplate. (The red spot
will wear with time - this is not a fault
and operation is not affected.)
Knob position
Use
1
Warming
2-3
Simmering
4-5-6
Cooking-Frying-Boiling
Before retiring for the evening it is
advisable to check that all the cooker
controls have been switched off.
For best simmering results, we
recommend you use the rear left hotplate.
Over heat protection
The thermal protector reduces the power, if
excessive heat is detected during abnormal
operating conditions.
1000W
2000 W
protector
1500W
^ protector
1500 W
^ protector