Audiovox DVD-220 - Manual (Page 15)

J. BASIC OPERATIONS
TV/AUDIO SELECTION
Press I POWER I on the TV and audio system.
1. Press "TVA/IDEO" on the TV. select
VIDEO mode (TV).
Select S-VIDEO mode to connect
to S-VIDEO. (if available)
2. Select the correct audio input on
the amplifier.
•* Each amplifier is different from another,
please refer to the manual of the amplifier,
(e.g.. connect the audio output of the DVD
player to the DVD audio input of an
amplifier.)
*— DVD/LD
Note: This step can be cancelled if you do
not connect it to the amplifier.
PLAY DISCS
DVD. CD
1. Press POWER I to turn on the unit.
PANEL
2. Press A on the front panel to open the
disc tray and load a disc with the label
side up.
OPEN/CLOSE
3. Press
A
again to close the disc tray. The
unit begins to read the disc.
FRONT PANEL
4. Press ► (PLAY) to play the disc.
AFTER STEP 4 IS FINISHED:
^ PLAY DVD
The TV screen shows DVD menu or
title menu.
•0 PLAY CD
Press ► (PLAY), the unit plays the
disc according to the track numbers.
5. Stop playback.
Press .
6. Remove the disc and cut off the unit.
■0 You have to push "®‘" button twice to
stop playback of a DVD disc.
Ȥ13'Ȥ