L. function setting, Tv display – Audiovox DVD-220 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
L. FUNCTION SETTING
3.Exit from menus.
Press direction buttons and ► (PLAY) to
select the relevant exit column.
Press the direction buttons
a
to exit
from "DUAL MONO".
Press the direction button
t
to select
"AUDIO SETUP", press ► (PLAY) to exit
from the current column and return to the
"AUDIO SETUP PAGE".
Press A , ? to select "MAIN PAGE", then
press ► (PLAY) to return to the main menu.
GENERAL SETUP
The setting structure is as follows:
-GENERAL PAGE-
r— TV DISPLAY »
-
TV OUTPUT »
-
SPDIF »
NORMAUPS
NORMAL/LB
WIDE
YUV
S-VIDEO
OFF
SPDIF/RAW
SPDIF/PCM
— CAPTIONS
» ON
OFF
SCREENSAVER »ON
OFF
MENU STYLE » TYPE 1
TYPE 2
MAIN PAGE
TV DISPLAY
1. NORMAUPS
This is selected when the unit is connected
to a normal TV.
Wide-screen images are shown on the
screen,
but
with
some
parts
cut
automatically.
2. NORMAL/LB
This is selected when the unit is connected
to a normal TV. Wide-screen images are
shown on the screen, with black belt on the
top and bottom.
3. WIDE
This is selected when the unit Is
connected to a wide-screen TV.
TV OUTPUT
1. YUV
Some TVs or monitors are equipped with
component video inputs. Connecting to
these inputs allows you to enjoy higher
quality picture playback.
In some TVs or monitors, the color levels
of the playback picture may be reduced
slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum
performance.
2. S-VIDEO
When you select this, you should connect
with S-VIDEO.
Ȥ
2 8
'Ȥ