Bolens 248-645A User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOOLS REQUIRED:
(1) Raw Hide or Plastic Hammer
(1)
1-1/8" wrench or adjustable wrench
(2)
1/2" wrenches
(1) Standard screw driver
(1) 3/4" wrench
(1) 5/8" wrench
OTHER MATERIALS NEEDED:
(A) One gallon or regular grade gasoline (for engine)
(B) 2-3/4 pints of SAE 30 or 10W oil (for engine)
(C) 2-1/2 gallons of 10W 30 H.D. oil only (for Log
Splitter).
(D) Cleaning rag
(E) Automotive grease
(F)
Funnel
(G) Hydraulic sealant tape (for pipe threads)
LIST OF CONTENTS IN HARDWARE PACK:
See figure 1.
B-
-
9
\
M
G^f
I 1
li 11
■N
^O
-H
iM
-p
-N
FIGURE 1
Your Log Splitter is shipped in two cartons.
1.
Remove the engine (with frame), two wheels,
engagement rod, engagement handle, hose and
hardware pack. See figures 1 & 2.
2. Remove the beam assembly from the other carton.
A.
(2)
Tapered roller bearings
B.
(2)
Hub caps
C.
(2)
Spacers
D.
(2)
Hex castle nuts 3/4-16 thread
HIGH 1
E.
(2)
Cotter pins 5/32" Dia.x 1.00" long
PRESSURE___ J
HOSE
F.
(1)
Hose clamp
G.
(2)
Hex self tapping screws #8 x .50" long
ENGAGEMENT-
H.
(4)
Hex screws 5/16-24 x 1.00" long
ROD
1.
(4)
Lockwashers 5/16" Scr.
J.
(4)
Hex nut 5/16-24 thread
ENGAGEMENT-
HANDLE
K.
(1)
Shoulder bolt
L.
(1)
Flat washer
M.
(1)
Ferrule
N.
(2)
Cotter pins
0.
(1)
Hex lock nut 5/16-18 thread
P.
(1)
Clevis pin 1/4" Dia. x 1.00" long
4
FIGURE 2